SIIG ID-DS0711-S1 Guia de Instalação descarregar pdf (Página 9)

• Interface - Port 1

- RS232 GTxD, RxD for data stream, no flow control

- RS232 (RTS/CTS) GTxD, RxD for data stream,

RTS/CTS for flow control

• Interface - Port 2: TheAuto Detect feature will detect

the connected serial device's interface as RS-422 or

RS-485 automatically

- RS485 (Half duplex): Half duplex RS-485 interface,

RTS for driver enable/disable

- RS422 (Full duplex): Full duplex RS-422 interface

• Baudrate- Port 1: 300 ~ 460800 bps

• Baudrate- Port 2: 300 ~ 115200 bps

• Parity: None, Even, Odd, Space, Mark

• Data Bits: 5, 6, 7, 8

• Stop Bit: 1 or 2

• Force off-line time: Setting for off-line duration

when there is no data input. The parameter can be

from "0 to 255" and the time unit is "Minute"

• Packet Collect Time

Packet collecting period setup of the device serial

port's Tx and Rx. It can be 0 to 999, and the time unit

is "mSec"

Figure 9

NOTE: There's no function for DI/DO. Skip Digital

I/O Port 1/2 section. See Figure 9.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sem comentários

SIIG ID-DS0711-S1 Guia de Instalação Página 9