SIIG Serial ATA PCI Guia de Instalação descarregar pdf (Página 16)

9. Remove the driver CD and restart Windows to

complete the installation.

For Existing Windows 98SE Installation

1. Install the board and boot up Windows.

2. At the Add New Hardware Wizard, click Next.

3. Select Search for the best driver for your device and

click Next.

4. Insert the driver CD, check Specify a location,

uncheck the other boxes, type D:\98SE, then click

Next. (Change D: to match the drive letter of your

CD-ROM)

5. Click Next, then Finish.

6. Remove the driver CD and restart Windows to

complete the installation.

To Verify Windows 98SE/ME Installation

1. Right-click My Computer, then click Properties.

Select Device Manager tab.

2. Double click SCSI controllers, Silicon Image SiI...

Controller should be listed.

3. Double click Silicon Image SiI... Controller and

click Properties. A message This device is working

properly is displayed in the dialog box when the

driver is correctly installed.

Bios Configuration

The Serial ATA PCI BIOS will appear everytime your

system starts up. If the bios doesn't show, please install

your controller in another PCI slot. During this (Post)

process, the bios will show up and indicate the devices

attached to it.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Sem comentários

SIIG Serial ATA PCI Guia de Instalação Página 16