SIIG Serial ATA PCI Guia de Instalação

1Serial ATA PCIQuick Installation Guide04-0265FIntroducing the Serial ATA PCIThe Serial ATA PCI is an ultra high-speed dual channelSerial ATA controll

104. Click Finish and restart Windows to complete theinstallation.Windows XP /Server 2003 (64-bit)For New Windows XP/2003 InstallationA new installati

11To Verify Windows 2000/XP/2003 Installation1. Right click My Computer and click Manage.2. Select Device Manager.3. Double click SCSI and RAID Contro

124. Click on the Plus (+) sign next to the CD-ROM drive,then double click the 64bit folder.5. Highlight AMD64 (for 64-bit extended processors)or IA64

135. Select Silicon Image Sil 3512 SATALinkController..., then click OK6. Follow on-screen instructions to complete WindowsServer 2008 installation.

14Existing Windows 2008 Installation1. Install the board and boot up Windows.2. At the Found New Hardware Wizard, select Locateand install driver soft

15Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

Serial ATA PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,Inc. Microsoft, Windows and Windows Vista are e

2Package Contents• Serial ATA PCI adapter• Driver CD• Serial ATA cable• Serial ATA power cable• Quick installation guideBoard LayoutFigure 1. Serial

31. Turn OFF the power to your computer and anyother connected peripheral devices.2. Unplug the power cord from the back of thecomputer.3. Remove the

4Figure 3. Connecting the Serial ATA cable5. Follow the same instructions when connecting asecond hard drive. Device connection is nowcomplete.6. Re

56. Select Search for a better driver..., then click Next.7. Check Specify a location, uncheck the other boxes,then click Next.8. Click Next, then cli

66. Check Specify a location, uncheck the other box,type D:\ME, click Next. (Change D: to match thedrive letter of your CD-ROM)7. Click Next, then cl

7Windows NT4.0For New Windows NT4.0 InstallationA new installation of Windows NT4.0 requires a floppydisk for the driver installation. To make this f

8To Verify Windows NT4.0 Installation1. Double click My Computer/Control Panel/SCSIAdapters.2. Highlight Silicon Image... Controller from SCSIAdapter

94. Insert the driver CD, check CD-ROM drives, uncheckthe other boxes, and click Next. Click Next again tocontinue.5. Click Finish, remove the drive