SIIG SC-SA0S11-S1 Guia de Instalação

1IntroductionThe DP SATA 6Gb/s 2-Port Hybrid PCIe is a highperformance SATA host adapter designed toadd two internal Serial ATA 6Gb/s channels toyour

102. Select New_VD, press Enter. Select Deletethen press Enter.3. When asked Do you want to delete thisvirtual disk? press Y to select Yes.4. When as

113. At the Windows desktop, insert the driverCD, close the CD autoplay window ifprompted.4. Click Windows key and R, typeD:\Drivers\drvSetup.exe, cl

123. Click Windows key and R, typeD:\Drivers\drvSetup.exe, click OK.(Change D: to match your CD-/DVD- ROMdrive letter)4. At the User Account Control,

135. Click Start, at the Start Search, typeD:\Drivers\drvSetup.exe, click Enter.(Change D: to match your CD-/DVD- ROMdrive letter)6. At the User Acco

145. At the User Account Control, clickContinue. Skip this step if not prompted.6. At Magni driver Setup, click Next, and clickNext again.7. Change th

154. When prompted, press S to specify thelocation of the driver.5. Insert the floppy disk, then press Enter.6. Select Marvell shared library (install

1611. At Magni driver Setup, click Next, and clickNext again.12. Change the Destination Folder if you wantto change it; otherwise, click Install.13. C

176. Select Marvell shared library (install first),then press Enter.7. Press S to specify the location of the driver.Select Marvell 91xx SATA controll

18For Existing Installation1. Setup the RAID array prior to driverinstallation and boot up to Windows. IfRAID is not required, boot up to Windowsand

19For Windows Vista: Right click Computer,click Manage, click Continue. Click DeviceManager.For Windows Server 2008 / 2008 R2: Rightclick Computer, cl

2System Requirements• Desktop PC with an available PCIe slot• Windows® 8 (32-/64-bit) / 7 (32-/64-bit) /Vista (32-/64-bit) / XP (32-/64-bit) /Server20

206. Change the Destination folder if you wantto change it; otherwise, click Install.7. Click Allow access at the Windows SecurityAlert. Skip this ste

21Figure 412. After log in, you can access to the MSU userinterface for further VD management. SeeFigure 4.Refer to your UserGuide on the softwareCD f

22Blank Page

23Technical Support and WarrantyQUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site atwww.siig.com and click Support. Our onl

PRODUCT NAMEDP SATA 6Gb/s 2-Port Hybrid PCIeFCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS BOPERATING ENVIRONMENT: FOR HOME OR OFFICE USEFCC COMP

3LayoutFigure 1: LayoutPort 1Port 2Serial ATAConnectorsPort 1 LED(optional)*Port 2 LED(optional)** Note: Connect the hard disk drive activityLED of t

4Hardware InstallationFor Low profile systems, install the spare lowprofile bracket now.General instructions for installing the card areprovided below

55. To install the card, carefully align the card'sbus connector with the selected PCI Expressslot on the motherboard. Push the boarddown firmly,

64. Attach the other end of the Serial ATA datacable to the Serial ATA connector on the DPSATA 6Gb/s 2-Port Hybrid PCIe.5. Follow the same instruction

7RAID 0 (Striping)This RAID array to be used on New/Blank harddrives. Striping will destroy existing data on thehard drive.1. As the BIOS boots press

8RAID 1 (Mirror)1. As the BIOS boots press Ctrl+M whenprompted to enter the RAID BIOS.2. At the next screen select HBA 0: Marvell 0,press Enter. Sele

9Rebuilding a Failed Mirror SetWhen a failure to one member occurs, you will benotified by the RAID BIOS during boot up. Thesteps below will guide yo